Research and Discussion Forums

Skip to content

Crossguards

For Historical European Fighting Arts, Weaponry, & Armor

Moderators: Webmaster, Stacy Clifford

Post Reply
User avatar
CalebChow
Posts: 237
Joined: Sun Oct 14, 2007 1:31 pm
Location: Philadelphia, Pennsylvania

Crossguards

Postby CalebChow » Thu Sep 18, 2008 6:54 pm

Quick question...

For longswords, how short and how long do the crossguards go?

Is there any particular reason for varying lengths (if they vary at all)?

Thanks!
"...But beware the Juggler, to whom the unseemliest losses are and who is found everywhere in the world, until all are put away." - Joachim Meyer
Top
User avatar
Sam Nankivell
Posts: 112
Joined: Sun Feb 25, 2007 1:20 pm
Location: Beijing, China.

Re: Crossguards

Postby Sam Nankivell » Thu Sep 18, 2008 10:45 pm

Crossguards do vary quite a bit. I have seen longswords that have crossguards/quillons just large enough to protect a hand (though these were usually attached to more complex hilts). I have also seen longswords that look like someone took the handle and crossguard off a two handed sword and stuck them on to a longsword blade.

I suspect the reason for variation is probably due to the personal preference of the users.
Prepositions are not words to end sentences with.
Top
User avatar
Jaron Bernstein
Posts: 1108
Joined: Sun Dec 07, 2003 12:58 am

Re: Crossguards

Postby Jaron Bernstein » Fri Sep 19, 2008 5:19 am

CalebChow wrote:Quick question...

For longswords, how short and how long do the crossguards go?

Is there any particular reason for varying lengths (if they vary at all)?

Thanks!


Vadi says to have your cross be as wide as the handle is long for a longsword.
Top
User avatar
Brent Lambell
Posts: 107
Joined: Thu Feb 15, 2007 3:02 pm
Location: Portland, OR

Postby Brent Lambell » Fri Sep 19, 2008 11:20 am

The size and shape of the cross will affect the balance and weight of the sword. A blade might be forged in Germany and then sent to a customer in Italy who would have the furniture of the weapon tailored to his liking. I imagine your personal style will be a factor as well since some people like the smaller but more maneuverable profile of a small cross and some want the protection of a larger one even if its clumsier.

Every part of the sword was made with a purpose in mind.
Top
User avatar
CalebChow
Posts: 237
Joined: Sun Oct 14, 2007 1:31 pm
Location: Philadelphia, Pennsylvania

Postby CalebChow » Sun Sep 21, 2008 8:53 pm

I see...

Hm, would anyone have any pictures of SHORT crossguards on longswords? I'm trying to make a comparison between the Renaissance longsword and the Chinese Han dynasty military sword that was used with 2 hands as well.

I'd *imagine* that if the weapons were of similar proportions the arts and techniques should probably be similar as well...
"...But beware the Juggler, to whom the unseemliest losses are and who is found everywhere in the world, until all are put away." - Joachim Meyer
Top
User avatar
Benjamin Smith
Posts: 184
Joined: Thu Jun 09, 2005 12:44 pm

Postby Benjamin Smith » Mon Sep 22, 2008 3:07 pm

Chinese crossguards are almost without exception smaller, think Viking period at most. They are rarely more than an inch or two out on either side. Your average longsword will probably have a cross at least 8" across, 10" to 12" aren't uncommon.

Check out the pics on Seven Stars Trading Co.'s website if you'd like examples of Chinese blades.
Respectfully,

Ben Smith
Top
User avatar
Vance Osterhout
Posts: 39
Joined: Sun Jun 01, 2008 4:15 pm
Location: Oceanside CA

Postby Vance Osterhout » Tue Sep 23, 2008 7:57 am

CHina history Forum has a lot of information on historical swords.
Other's swords are sharp, Mine alone is dull.

-Lao Zi
Top
User avatar
CalebChow
Posts: 237
Joined: Sun Oct 14, 2007 1:31 pm
Location: Philadelphia, Pennsylvania

Postby CalebChow » Tue Sep 23, 2008 4:36 pm

I've asked on the China History Forum and even on Scott Rodell's forum.

Still awaiting a response, but my search continues.

More of a technique question related to the crossguard, but without a decently long crossguard would all 5 masterstrikes in the German system still basically work as they should?
"...But beware the Juggler, to whom the unseemliest losses are and who is found everywhere in the world, until all are put away." - Joachim Meyer
Top
User avatar
Sal Bertucci
Posts: 591
Joined: Fri May 02, 2008 8:04 pm
Location: Denver area, CO

Postby Sal Bertucci » Tue Sep 23, 2008 8:50 pm

I don't think they would, b/c part of the techniques is the fact that they defend you while they are being executed.
Top
User avatar
CalebChow
Posts: 237
Joined: Sun Oct 14, 2007 1:31 pm
Location: Philadelphia, Pennsylvania

Postby CalebChow » Tue Sep 23, 2008 10:13 pm

Sal Bertucci wrote:I don't think they would, b/c part of the techniques is the fact that they defend you while they are being executed.


That's what I thought as well.

:x seems like it's almost impossible to find out the art of possibly the earliest 2handed sword is...
"...But beware the Juggler, to whom the unseemliest losses are and who is found everywhere in the world, until all are put away." - Joachim Meyer
Top
Post Reply

Return to “Research and Training Discussion”

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB® Forum Software © phpBB Limited
 

 

 
 
Note: ARMA™ - The Association for Renaissance Martial Arts and the ARMA logo are federally registered trademarks, copyright 2001. All rights reserved. No use of the ARMA name or emblem is permitted without authorization. Reproduction of material from this site without written permission of the authors is strictly prohibited. HACA and The Historical Armed Combat Association copyright 1999 by John Clements. All rights reserved. Contents of this site 1999 by ARMA.